Q4OS Forum

judydudi

Member

From: Hamburg

Registered: 2016-10-28

Posts: 81

Website

Q4OS Gemini installation shim_init() failed on Fujitsu U748

trying to boot into Q4OS 4.7 from USB install medium i get

set_second_stage() failed: Invalid Parameter
Something has gone seriously wrong: shim_init() failed: Invalid Parameter

then, computer is going off after some seconds.

With Q4OS 3.5 (Centaurus) everything fine.

I found this has to do with the grub version. 2.04 works. 2.06 not.

I am not a grub professional, so I ask if anyone has an idea how I can persuade grub 2.06 to start, or how I can provide the installation media with the old grub version.
Thanks in advance

Last edited by judydudi (2022-03-02 14:25)

q4osteam

Q4OS Team

Registered: 2015-12-06

Posts: 4,502

Website

Re: Q4OS Gemini installation shim_init() failed on Fujitsu U748

Which way did you create the USB medium ? Q4OS 4.7 live media carries Grub 2.04-18 version. If you just do a copy of Q4OS iso image, USB should boot to Grub 2.04 version.

sudo cp q4os-4.7-x64-tde.r1.iso /dev/sdX

double check sdX is the USB, not your harddrive device.

An alternative way worth to try could be using Q4OS install media instead of live media.

judydudi

Member

From: Hamburg

Registered: 2016-10-28

Posts: 81

Website

Re: Q4OS Gemini installation shim_init() failed on Fujitsu U748

i did create the install medium with BalenaEtcher

q4os-4.7-x64-tde.r1.iso and
q4os-4.7-x64-instcd.r1.iso

problem as described.

q4os-3.15-x64-tde.r1.iso starts fine.

so i created a q4os-4.7-x64-tde.r1.iso install medium with rufus in iso mode (to edit the medium).
After this i copied file bootx64.efi from the
q4os-3.15 medium to the
q4os-4.7 stick ( directory : \EFI\boot )

and q4os is starting!

I will try next days the install and see what happens.

Last edited by judydudi (2022-03-03 10:14)

judydudi

Member

From: Hamburg

Registered: 2016-10-28

Posts: 81

Website

Re: Q4OS Gemini installation shim_init() failed on Fujitsu U748

install runs fine with the stick prepared like my last post on the Fujitsu Lifebook U748 (with secure boot enabled)
i did a install parallel to windows.
second or third boot, system comes to prompt like
https://www.q4os.org/forum/viewtopic.php?id=4028
Also wifi is enabled only first time.

installing application network manager, reboot and deinstall network manager, i get stable wifi enabled status.
then installing paket 'plymouth' resolves the prompt on boot.

Last edited by judydudi (2022-03-31 10:32)