No internet connection!

Jean 1 · 2019-12-14 15:38

I have tried to surf a few minutes, and I have found two webpages which do that same thing, but it was OK for the others... (I was obliged to power down the PC):

https://www.nytimes.com/ (...after less than 1 minute)

https://www.gettyimages.fr/photos/erol- … st#license

Dai_trying · 2019-12-14 16:30

NYT has these errors

main-d6c0cc73a4e43d5ea87c.js:1:206206
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -538 (font-family: "nyt-franklin" style:normal weight:300 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-300.bc7be4c5d8cacb780f896c5cbe0c0d7f.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:481:12
downloadable font: hhea: bad linegap: -538 (font-family: "nyt-franklin" style:normal weight:300 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-300.bc7be4c5d8cacb780f896c5cbe0c0d7f.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:481:12
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -538 (font-family: "nyt-franklin" style:normal weight:bold stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-700.b44c88f09ca7ce914b836d4ae72891b8.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:511:12
downloadable font: hhea: bad linegap: -538 (font-family: "nyt-franklin" style:normal weight:bold stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-700.b44c88f09ca7ce914b836d4ae72891b8.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:511:12
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -538 (font-family: "nyt-franklin" style:normal weight:500 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-500.d6c06a3d84a57100edad5bf9b84ff739.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:491:12
downloadable font: hhea: bad linegap: -538 (font-family: "nyt-franklin" style:normal weight:500 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/franklin/franklin-normal-500.d6c06a3d84a57100edad5bf9b84ff739.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:491:12
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -577 (font-family: "nyt-cheltenham" style:normal weight:200 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/cheltenham/cheltenham-normal-200.40ccfe2cc61a71e6617e56162d49b896.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:61:12
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -476 (font-family: "nyt-cheltenham" style:normal weight:bold stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/cheltenham/cheltenham-normal-700.530cfb72378419eedb60da7e266ad5f1.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:101:12
downloadable font: OS/2: Bad sTypoLineGap, setting it to 0: -476 (font-family: "nyt-cheltenham" style:normal weight:500 stretch:normal src index:0) source: https://g1.nyt.com/fonts/family/cheltenham/cheltenham-normal-500.a22ae3ed1e775ce90ced16f1822f4ddc.woff2  
web-fonts.5810def60210a2fa7d0848f37e3fa048bb6147b1.css:91:12
et2 snippet should only load once per page  
www.nytimes.com:2:17
unreachable code after return statement[Learn More] 
gtm.js:1:21
Subscriptions Runtime: 0.1.22.85  
swg.js:25:822
unreachable code after return statement[Learn More] 
gtm.js:1:21
unreachable code after return statement[Learn More] 
tags.js:2:93334
unreachable code after return statement[Learn More]  
gtm.js:1:21
Content Security Policy: Ignoring “'unsafe-inline'” within script-src: ‘strict-dynamic’ specified  
(unknown)
Content Security Policy: Ignoring “https:” within script-src: ‘strict-dynamic’ specified  
(unknown)
Content Security Policy: Ignoring “http:” within script-src: ‘strict-dynamic’ specified  
(unknown)
unreachable code after return statement[Learn More] 
gtm.js:1:21

unreachable code after return statement is something I would be concerned about if I were writing this page, and possibly a candidate for responsibility.

Erol Flynn Images has these errors

header.getty: getLocalStorageItem() found no data for search.numAssetsViewed.  
application-f367b8d9912df5f314f6.js:1:212407
GTM PTag v1.2; tagId: 2613782675190 
gtm.js:6612:208
Pinterest Tag Error: 'load' command was called multiple times.  Previously for tag id '2613782675190', now for tag id '2613782675190'.  
main.532239b0.js:1:30776
XML Parsing Error: no root element found
Location: https://spectrum.gettyimages.com/v3/signals
Line Number 1, Column 1:  
signals:1:1
XML Parsing Error: no root element found
Location: https://spectrum.gettyimages.com/v3/signals
Line Number 1, Column 1: 
signals:1:1
Firing Pinterest event: search  
gtm.js:6612:208
Event Data:  
gtm.js:6612:208
Object { np: "gtm", search_query: "erol flynn" }  
gtm.js:6612:208
Firing Pinterest event: pagevisit  
gtm.js:6612:208
Event Data:  
gtm.js:6612:208
Object { np: "gtm" }  
gtm.js:6612:208
[Facebook Pixel] - Duplicate Pixel ID: 106261433049264.  
fbevents.js:23:6159

But I don't see anything too bad here.

So I think the problem is likely to be badly designed web pages rather than a problem with the browser, and out of interest I checked my own website and it reported no errors at all, but I don't use a lot of javascript so that is likely the main area of concern.

Out of interest have you tried disabling javascript? I use Toggle JavaScript [Enabled/Disabled] by riis which gives me a button on my toolbar to enable/disable javascript, it might be worth looking into. Both of these sites seem to work with javascript disabled (and no console errors either).

Jean 1 · 2019-12-15 16:08

Hello! Hello!

I have installed toogle javascript. Here are the results:

For the site: https://www.leboncoin.fr/ventes_immobilieres/offres/

...I can surf on it but most links don't work. However, it's possible to do everything by this way: first disable javascript, and if a link doesn't work, enable it just the time to click on it, and disable javascript immediatly after.

For the site: https://www.nytimes.com/

I have seen no improvement, my PC have frozen.

For the site https://www.gettyimages.fr/photos/erol- … st#license

It works fine when I disable javascript, but when I have tried to close the web broser, the PC have frozen. In the last two case, I was obliged to switch off the power again...

Dai_trying · 2019-12-15 16:46

could you install inxi and post the output of inxi -F

sudo apt install inxi

inxi -F

Jean 1 · 2019-12-16 00:05

Hello!

Here is exactly what's happened:

[sudo] Mot de passe de adminq :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
inxi est déjà la version la plus récente (3.0.32-1-1).
inxi passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
adminq@q4os-desktop:~$ inxi -F
System:
Host: q4os-desktop Kernel: 4.19.0-6-686-pae i686 bits: 32
Desktop: Trinity R14.0.6 Distro: Q4OS 3.9.2-n1
Machine:
Type: Desktop System: VIA product: VT8367-8235 v: N/A
serial: <root required>
Mobo: N/A model: VT8367-8235 serial: <root required> BIOS: Phoenix
v: 6.00 PG date: 04/15/2005
CPU:
Topology: Single Core model: AMD Athlon bits: 32 type: UP
L2 cache: 512 KiB
Speed: 2127 MHz min/max: N/A Core speed (MHz): 1: 2127
Graphics:
Device-1: NVIDIA NV17 [GeForce4 MX 440] driver: nouveau v: kernel
Display: x11 server: X.Org 1.20.4 driver: nouveau
unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz
OpenGL: renderer: Mesa DRI nv17 x86/MMX+/3DNow!+/SSE v: 1.2 Mesa 18.3.6
Audio:
Device-1: VIA VT8233/A/8235/8237 AC97 Audio driver: snd_via82xx
Sound Server: ALSA v: k4.19.0-6-686-pae
Network:
Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too
IF: enp0s9 state: unknown speed: 10 Mbps duplex: half
mac: 00:08:54:37:88:08
IF-ID-1: ppp0 state: unknown speed: N/A duplex: N/A mac: N/A
Drives:
Local Storage: total: 37.27 GiB used: 3.05 GiB (8.2%)
ID-1: /dev/sda vendor: Western Digital model: WD400BB-23FJA0
size: 37.27 GiB
Partition:
ID-1: / size: 35.45 GiB used: 3.05 GiB (8.6%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 1023.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
Sensors:
Message: No sensors data was found. Is sensors configured?
Info:
Processes: 114 Uptime: 3m Memory: 938.0 MiB used: 240.0 MiB (25.6%)
Shell: bash inxi: 3.0.32
adminq@q4os-desktop:~$

Dai_trying · 2019-12-16 00:19

I think I have a similar spec laptop somewhere, I will try and find it tomorrow and install Q4OS to see if I get any similar issues, the only thing I wont be ablr to replicate is the ppoe connection as I have standard adsl here, but I will take a look and see what happens with those websites.

One other thing you could post is the result of

LC_ALL=C ip addr

although I'm not sure if it will show anything that is not in inxi output.

Jean 1 · 2019-12-16 21:31

It's very kind of you, thank you very much for your help and for what you do.

Here is the output of LC_ALL=C ip addr:

.......................................

I would want to ask you two questions:

First, I have an other old computer with the same CPU but with an other motherboard. May I connect the hard drive on which I have installed Q4OS directly on it and boot up, or have I to reinstall Q4OS on an other HD to boot up that other computer?

Secondly, how can I clone my (very old) HD with Q4OS on an other HD? May I use XXclone from windows XP?

Last edited by Jean 1 (2019-12-17 00:06)

Dai_trying · 2019-12-16 22:05

I don't see anything obvious and it looks like the ppoe connection is active. If that is your real IP ADDRESS please edit it out of your post in case it might cause you security problems (I don't know how secure pppoe is)
And to your questions:

First :
Yes, simply replace the HDD and it should boot without issue (if it works on the first one). There are a couple of caveats though, if the hdd contains a standard BIOS boot install then the other machine would need to be set the same, if the system is UEFI you might need to perform some other steps first, although this will depend on the make, some are better than others. Also there is a slight chance that graphics driver might prevent start up but Q4OS has been very reliable for me when swapping drives.

Secondly :
This can be easily done from the command line with the command dd but be warned entering the wrong command or sequence of commands/parameters could wipe your HDD which would be time consuming (but not impossible) to recover and it is highly likely you would lose at least some data and definitely not regain a reusable system. If you need some help with this it might be best to open another thread specifically for it to make it easier to find in case it helps other users too.
Also you would need to be able to boot to a stable live session (any Linux OS will work for this) if you want to clone the whole hdd.

Jean 1 · 2019-12-17 00:10

Thank you very much!

Sorry, I have deleted the entire ouput in my previous post, because it was my real IP adress and as I am a beginner, I don't know exactly what I was supposed to suppress in it!...

Q4OS Forum

#51 2019-12-14 15:38

Re: No internet connection!

#52 2019-12-14 16:30

Re: No internet connection!

#53 2019-12-15 16:08

Re: No internet connection!

#54 2019-12-15 16:46

Re: No internet connection!

#55 2019-12-16 00:05

Re: No internet connection!

#56 2019-12-16 00:19

Re: No internet connection!

#57 2019-12-16 21:31

Re: No internet connection!

#58 2019-12-16 22:05

Re: No internet connection!

#59 2019-12-17 00:10

Re: No internet connection!

Board footer