Q4OS Forum

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

No connection after install

I just installed Q4OS on a desktop. Now it won't connect to network. It detects network, but won't connect. I get an error saying "Secrets were not found" or something like that.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Okay I got internet working and was able to update nvidia drivers. But now after reboot the display is small. went to display and the max size is 640 x 480! My screen is not that small! It's hooked up to a monitor.

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

Was the screen small before you installed/updated the nvidia drivers?

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

No, but it is slightly blurry. Now thing are taking forever to load(login screen, desktop, etc.) they just don't load

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

could you post the results of inxi -F you might need to install inxi if you haven't already.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

I can't because it won't get to the login screen.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

I'm going to reinstall Q4OS and then will install inxi

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

OK, dont install video drivers yet in case they are the cause of the problem.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Okay. Right now I'm just waiting for the login screen to show up. It just shows the mouse cursor loading.

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

Is that the new install?

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Yes. It has not even boot up to the login yet..

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

That is pointing the finger at hardware failure maybe?? did the live-cd run ok?

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

There was no live option in the install menu.

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

Sorry I always use the live-cd for my installs, could you download and try using the live-cd to see if that works?

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Where do I download the live CD?

bin

Member

From: U.K.

Registered: 2016-01-28

Posts: 1,335

Re: No connection after install

http://q4os.org/downloads1.html

half way down the page

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Ah, Okay. Thanks I will download that

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

The live cd is stuck on the three dots loading screen, won't go past that.

bin

Member

From: U.K.

Registered: 2016-01-28

Posts: 1,335

Re: No connection after install

This does have the hallmarks of a hardware issue of some sort, I wonder if it is a 32 bit box and you're using a 64 bit medium. I came across a range of Dells in the 2006 ish period that would run 64bit Windows but no way would they go 64 bit linux - at the time. Granted this seem unlikely as you've already had an install work.

So, please can you tell us more about the machine - make, model, age, amount of memory etc. You can get some valuable info by accessing the BIOS screen if you don't know about the RAM figure. It would also help to know if it has a sound card and network card or whether these are just off the motherboard. You can tell if they are separate cards as they'll occupy a slot in the rear of the machine.

It may just be worth you while trying a 32 bit live cd as well. How are you burning these, and do you check the md5sum values of the downloads to ensure they are good?

Last edited by bin (2016-10-23 15:48)

Dai_trying

Member

From: UK

Registered: 2015-12-14

Posts: 2,993

Re: No connection after install

I still think this is pointing towards hardware failure, the only other thing I would do is to try another live-cd, maybe ubuntu and see if that will boot.
And one more thing to check, have you changed or reset bios settings at all? if not check to see if any values have changed or don't look right, and if you have changed anything try changing it back and see how that goes.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

I resetted the BIOS. That didn't work. I had tried the 32-bit live cd, and that didn't work either. Here is a full list of specs on the desktop:

Brand
    eMachines

Model
    EL1333G-01W (PT.NBG02.001)

Quick Info

Type
    Student / Home Office

Processor
    AMD Athlon 2850e 1.8GHz

Cache Per Processor
    512 KB L2 Cache

Memory
    2GB DDR2

Storage
    320GB 7200RPM SATA

Optical Drive
    16X DVD Super Multi Double-Layer Drive

Graphics
    NVIDIA GeForce 6150 SE integrated graphics

Ethernet
    Gigabit Ethernet

Power Supply
    220W

Operating System
    Windows 7 Home Premium 64-Bit

CPU

CPU Type
    Athlon

CPU Speed
    2850e (1.8 GHz)

L2 Cache Per CPU
    512 KB

Graphics

GPU/VGA Type
    NVIDIA GeForce 6150 SE

Graphics Interface
    Integrated video

Memory

Memory Capacity
    2 GB DDR2

Memory Spec
    1 GB x 2

Maximum Memory Supported
    4 GB

Hard Drive

HDD
    320 GB

HDD Interface
    SATA

HDD RPM
    7200rpm

Optical Drive

Optical Drive Type
    DVD Super Multi

Optical Drive Spec
    16X DVD Super Multi Double-Layer Drive

Communications

LAN Speed
    10/100/1000Mbps

Front Panel Ports

Front USB
    2

Front Audio Ports
    2

Card Reader
    Multi-in-1 Digital Media Card Reader

Back Panel Ports

PS/2
    2

Video Ports
    1 VGA

Rear USB
    4

RJ45
    1 port

Rear Audio Ports
    5 ports

Last edited by ThisGuy1996 (2016-10-24 00:17)

bin

Member

From: U.K.

Registered: 2016-01-28

Posts: 1,335

Re: No connection after install

Well, in theory that should work....though the single core cpu will never be a flyer.

If you still have the bootable media that gave you the original install that sort of worked, then use that again.

When you get to the boot options use Recovery Mode and enter nomodeset at the end of the string. That should boot with a basic vesa driver for graphics.

You may need to use nomodeset xforcevesa if the above doesn't help.

If that works then at least you're on the right track to getting a working machine.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

You mean the OS that came with the desktop originally? Or the first Q4OS install that worked?

bin

Member

From: U.K.

Registered: 2016-01-28

Posts: 1,335

Re: No connection after install

The first Q4OS that worked.

ThisGuy1996

Member

Registered: 2016-02-02

Posts: 176

Re: No connection after install

Okay, i'll see how this works...