No internet connection!

Jean 1 · 2019-12-08 21:23

Thank you very much! It works but some errors seems to have occured.

Here is the output of these 2 commands (Bureau means Desktop, please see the translation after the output in french):

adminq@q4os-desktop:~/Bureau/pppoe$ cd ~/Bureau/pppoe
adminq@q4os-desktop:~/Bureau/pppoe$ sudo dpkg -i *.deb
(Lecture de la base de données... 53638 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de gettext-base_0.19.8.1-9_i386.deb ...
Dépaquetage de gettext-base (0.19.8.1-9) sur (0.19.8.1-9) ...
Sélection du paquet ifupdown précédemment désélectionné.
Préparation du dépaquetage de ifupdown_0.8.35_i386.deb ...
Dépaquetage de ifupdown (0.8.35) ...
Préparation du dépaquetage de iproute2_4.20.0-2_i386.deb ...
Dépaquetage de iproute2 (4.20.0-2) sur (4.20.0-2) ...
Préparation du dépaquetage de locales_2.28-10_all.deb ...
Dépaquetage de locales (2.28-10) sur (2.28-10) ...
Sélection du paquet ppp précédemment désélectionné.
Préparation du dépaquetage de ppp_2.4.7-2+4.1_i386.deb ...
Dépaquetage de ppp (2.4.7-2+4.1) ...
Sélection du paquet pppoe précédemment désélectionné.
Préparation du dépaquetage de pppoe_3.12-1.2_i386.deb ...
Dépaquetage de pppoe (3.12-1.2) ...
Sélection du paquet pppoeconf précédemment désélectionné.
Préparation du dépaquetage de pppoeconf_1.21_all.deb ...
Dépaquetage de pppoeconf (1.21) ...
Préparation du dépaquetage de sed_4.7-1_i386.deb ...
Dépaquetage de sed (4.7-1) sur (4.7-1) ...
Préparation du dépaquetage de whiptail_0.52.20-8_i386.deb ...
Dépaquetage de whiptail (0.52.20-8) sur (0.52.20-8) ...
Paramétrage de gettext-base (0.19.8.1-9) ...
Paramétrage de iproute2 (4.20.0-2) ...
Paramétrage de locales (2.28-10) ...
Generating locales (this might take a while)...
en_US.UTF-8... done
fr_FR.UTF-8... done
Generation complete.
dpkg: des problèmes de dépendances empêchent la configuration de ppp :
ppp dépend de libpcap0.8 (>= 0.9.8) ; cependant :
Le paquet libpcap0.8 n'est pas installé.

dpkg: erreur de traitement du paquet ppp (--install) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de pppoe :
pppoe dépend de ppp (>= 2.3.10-1) ; cependant :
Le paquet ppp n'est pas encore configuré.

dpkg: erreur de traitement du paquet pppoe (--install) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de pppoeconf :
pppoeconf dépend de ppp (>= 2.4.2+20040428-2) | pppoe (>= 3.0) ; cependant :
Le paquet ppp n'est pas encore configuré.
Le paquet pppoe n'est pas encore configuré.
pppoeconf dépend de ppp (>= 2.4.1.uus2-4) ; cependant :
Le paquet ppp n'est pas encore configuré.

dpkg: erreur de traitement du paquet pppoeconf (--install) :
problèmes de dépendances - laissé non configuré
Paramétrage de sed (4.7-1) ...
Paramétrage de whiptail (0.52.20-8) ...
Paramétrage de ifupdown (0.8.35) ...
Created symlink /etc/systemd/system/multi-user.target.wants/networking.service → /lib/systemd/system/networking.service.
Created symlink /etc/systemd/system/network-online.target.wants/networking.service → /lib/systemd/system/networking.service.
Traitement des actions différées (« triggers ») pour libc-bin (2.28-10) ...
Traitement des actions différées (« triggers ») pour man-db (2.8.5-2) ...
Traitement des actions différées (« triggers ») pour systemd (241-7~deb10u1) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.23-4) ...
Traitement des actions différées (« triggers ») pour mime-support (3.62) ...
Des erreurs ont été rencontrées pendant l'exécution :
ppp
pppoe
pppoeconf
adminq@q4os-desktop:~/Bureau/pppoe$

Here is the translation by google:

adminq @ q4os-desktop: ~ / desktop / pppoe $ cd ~ / desktop / pppoe
adminq @ q4os-desktop: ~ / desktop / pppoe $ sudo dpkg -i * .deb
(Reading the database ... 53638 files and directories already installed.)
Preparing the unpacking of gettext-base_0.19.8.1-9_i386.deb ...
Unpacking gettext-base (0.19.8.1-9) on (0.19.8.1-9) ...
Selection of the ifupdown package previously deselected.
Preparing unpacking of ifupdown_0.8.35_i386.deb ...
Unpacking ifupdown (0.8.35) ...
Preparing the unpacking of iproute2_4.20.0-2_i386.deb ...
Unpacking iproute2 (4.20.0-2) on (4.20.0-2) ...
Preparing the unpacking of local_2.28-10_all.deb ...
Unpacking local (2.28-10) on (2.28-10) ...
Selection of the previously unselected ppp package.
Preparing the unpacking of ppp_2.4.7-2 + 4.1_i386.deb ...
Unpacking ppp (2.4.7-2 + 4.1) ...
Selection of the previously unselected pppoe package.
Preparing the unpacking of pppoe_3.12-1.2_i386.deb ...
Unpacking pppoe (3.12-1.2) ...
Selection of the previously unselected pppoeconf package.
Preparing the unpacking of pppoeconf_1.21_all.deb ...
Unpacking pppoeconf (1.21) ...
Preparing the unpacking of sed_4.7-1_i386.deb ...
Unpacking of sed (4.7-1) on (4.7-1) ...
Preparing the unpacking of whiptail_0.52.20-8_i386.deb ...
Unpacking whiptail (0.52.20-8) on (0.52.20-8) ...
Parameterization of gettext-base (0.19.8.1-9) ...
Setting iproute2 (4.20.0-2) ...
Local Settings (2.28-10) ...
Local Generating (this might take a while) ...
en_US.UTF-8 ... done
en_US.UTF-8 ... done
Complete generation.
dpkg: dependency issues prevent ppp configuration:
ppp depends on libpcap0.8 (> = 0.9.8); however:
The libpcap0.8 package is not installed.

dpkg: ppp package (--install) processing error:
dependency issues - left unconfigured
dpkg: dependency issues prevent pppoe configuration:
pppoe depends on ppp (> = 2.3.10-1); however:
The ppp package is not configured yet.

dpkg: pppoe package (--install) processing error:
dependency issues - left unconfigured
dpkg: dependency issues prevent pppoeconf configuration:
pppoeconf depends on ppp (> = 2.4.2 + 20040428-2) | pppoe (> = 3.0); however:
The ppp package is not configured yet.
The pppoe package is not configured yet.
pppoeconf depends on ppp (> = 2.4.1.uus2-4); however:
The ppp package is not configured yet.

dpkg: pppoeconf package (--install) processing error:
dependency issues - left unconfigured
Parameterization of sed (4.7-1) ...
Parameterization of whiptail (0.52.20-8) ...
Setting up ifupdown (0.8.35) ...
Created symlink /etc/systemd/system/multi-user.target.wants/networking.service → /lib/systemd/system/networking.service.
Created symlink /etc/systemd/system/network-online.target.wants/networking.service → /lib/systemd/system/networking.service.
Trigger processing for libc-bin (2.28-10) ...
Processing of deferred actions ("triggers") for man-db (2.8.5-2) ...
Trigger processing for systemd (241-7 ~ deb10u1) ...
Trigger processing for desktop-file-utils (0.23-4) ...
Treatment of deferred actions ("triggers") for mime-support (3.62) ...
Errors were encountered during execution:
ppi
pppoe
pppoeconf
adminq @ q4os-desktop: ~ / Desktop / adsl $

Dai_trying · 2019-12-08 22:20

Did you have the libpcap deb file? if not download it ( https://packages.debian.org/buster/libpcap0.8 ) and try this

 sudo dpkg -i libpcap0.8_1.8.1-6_i386.deb

You might need to also run the following to ensure the system is clean.

sudo apt -f install

Jean 1 · 2019-12-09 22:13

Hello!

Thank you very much for your help!!

...I managed to have an internet connection but (big) problems remain.

What I have done: I have done what you told me, entered command sudo pppoeconf, obtained the connection; I have downloaded and installed Firefox web browser, and french langage for O4OS (without problem).

But it's impossible to launch Firefox: nothing is happening.

When I launch Konqueror, it connects but for a very short time, after one or two web pages, a message says "an error occurs during..." "impossible to connect..." and it seems like I had losed the connection. But I think it's not case, it seems that something use the connection meanwhile... (I have had no problem downloading programs)

And when I can use Konqueror, the web pages are not complete: I have big problems with javascript. it's exactly like when I use windows 98se!...

Finally, I have suppressed the false DHCP wired connection, because the DHCP connection manager constantly try to connect... But it changes nothing to the previous problems.

How can I fix these problems with Konqueror and Firefox, and surf on the web without without having limitations with javascript?

Thank you in advance!

q4osteam · 2019-12-09 22:33

Jean 1 wrote:

... I have downloaded and installed Firefox web browser, and french langage for O4OS (without problem). ... But it's impossible to launch Firefox: nothing is happening.

Which way did you install Firefox ? Please describe.

Please run Firefox from terminal:
$ firefox
and post terminal output here to analyze.

Dai_trying · 2019-12-09 23:04

You might need to run firefox-esr from the terminal if you installed the debian version. And Konqeoror is not really a good browser for modern web pages, it can be useful for html only sites but doesn't have the extra things that Firefox/Chrome (or their derivatives) have.

Jean 1 · 2019-12-09 23:40

I simply downloaded Firefox with the Q4OS software center, and I followed the instructions. I do the same way for downloading VLC media player and Wine. I used the icon from de desktop to download the french langage for Q4OS.

Here is the output of $ firefox:

This browser version requires a processor with the SSE2 instruction set extension.
You may be able to obtain a version that does not require SSE2 from your Linux distribution.
adminq@q4os-desktop:/media/adminq/883C-D812$

....With firefox-esr, the output is "command not found"

Dai_trying · 2019-12-10 08:40

If you now have an internet connection could you post the output of

inxi -F

if you get a "command not found" you may need to install it first

sudo apt install inxi

Jean 1 · 2019-12-10 19:24

Thank you very much for your help.

I have downloaded inxi package from here: https://packages.debian.org/buster/inxif from an other PC where I get an internet connection.

I get a "command not found". Here is the output of "sudo apt install inxi":

adminq@q4os-desktop:~/Bureau/inxi$ sudo apt install inxi
E: dpkg a été interrompu. Il est nécessaire d'utiliser « sudo dpkg --configure -a » pour corriger le problème.
adminq@q4os-desktop:~/Bureau/inxi$

Jean 1 · 2019-12-10 19:28

I could translate it by:

"E: dpkg has been interrupted. It is necessary to use "sudo dpkg --configure -a" to correct the problem."

I'm sorry for my bad english.

Dai_trying · 2019-12-10 20:23

To install the package without internet connection you would need to use the following command

LC_ALL=C sudo apt install ./inxi_3.0.32-1-1_all.deb

but it will likely fail due to dependency issues.
I would follow the advise from apt and try running

LC_ALL=C sudo dpkg --configure -a

but again it may fail without internet connection but should be tried first.

Note: LC_ALL=C before the commands with give you output in English to make pasting it here easier

Jean 1 · 2019-12-10 21:56

Thank you for your reply. Here is the result:

adminq@q4os-desktop:/media/adminq/883C-D812$ LC_ALL=C sudo dpkg --configure -a
Setting up initramfs-tools (0.133+deb10u1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools (0.133+deb10u1) ...
update-initramfs: Generating /boot/initrd.img-4.19.0-6-686-pae
cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries
nor crypto modules. If that's on purpose, you may want to uninstall the
'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs
integration and avoid this warning.
setupcon is missing. Please install the 'console-setup' package.
adminq@q4os-desktop:/media/adminq/883C-D812$ LC_ALL=C sudo apt install ./inxi_3.0.32-1-1_all.deb
[sudo] password for adminq:
Reading package lists... Done
E: Unsupported file ./inxi_3.0.32-1-1_all.deb given on commandline
adminq@q4os-desktop:/media/adminq/883C-D812$

Dai_trying · 2019-12-11 00:21

Just to re-cap, do you have any networking on this machine? I thought you had the network connection sorted and needed to get firefox working?

Jean 1 · 2019-12-11 00:48

Yes, I have an internet connection, but very bad. I would say: just the time to display one or two pages with the browser. But it's very odd because to download software with Q4OS software center for 15 minutes, all is right...

1) when I launch Konqueror, it connects but for a very short time, after one or two pages, a message says "an error occurs while loading the page..." "impossible to connect to https://www..." and it seems like I had losed the connection. But I think it's not case, it seems that something use the connection meanwhile... All that time the link LED on the modem flashes very fast...

And when I can use Konqueror, the web pages are not complete: I have big problems with javascript. it's exactly like when I use windows 98se!...

2) The firefox version I have installed with Q4OS software center is not the correct one: I need a browser version of Firefox which no requires a processor with the SSE2 instruction set extension (my processor is AMD Athlon 2800 XP-M).

So, firefox doesn't work at all, and the connection is very very bad with Konqueror (unusable).

Dai_trying · 2019-12-11 07:42

Ok, if we forget the browser issue for a moment and concentrate on getting your internet connection stable first I think it would be easier, after booting up could you run the following

LC_ALL=C sudo apt update

and then if no errors

LC_ALL=C sudo apt upgrade

and then again if no errors

LC_ALL=C sudo apt install console-setup

and then

LC_ALL=C sudo apt -f install

Please post any output or errors here.

q4osteam · 2019-12-11 12:27

Please follow instructions by @Dai_trying to get an active Internet connection first.

Once you get Internet connection working, we would recommend you to install Palemoon browser using the Q4OS installer. It should work even for non-see systems. You can download the installer using the link below:

https://sourceforge.net/projects/q4os/f … erimental/

Jean 1 · 2019-12-11 19:59

OK, you can find here exactly what's happened:

adminq@q4os-desktop:/media/adminq/883C-D812$ LC_ALL=C sudo apt update
[sudo] password for adminq:
Hit:1 http://security.debian.org/debian-security buster/updates InRelease
Hit:2 http://q4os.org/q4repo q4os-3-0-cn InRelease
Hit:3 http://q4os.org/qtderepo buster InRelease
Hit:4 http://q4os.org/qextrepo buster-firefox-cn InRelease
Hit:5 http://ftp.debian.org/debian buster InRelease
Hit:6 http://ftp.debian.org/debian buster-updates InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
36 packages can be upgraded. Run 'apt list --upgradable' to see them.
adminq@q4os-desktop:/media/adminq/883C-D812$ LC_ALL=C sudo apt upgrade
E: Could not get lock /var/lib/dpkg/lock-frontend - open (11: Resource temporarily unavailable)
E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), is another process using it?
adminq@q4os-desktop:/media/adminq/883C-D812$

I did not go further.

Dai_trying · 2019-12-11 20:17

That looks ok so far, it might be that unattended upgrades is installed and it will automatically upgrade the packages for you, this will lock apt from performing other install/update/upgrade commands and is not unusual. Give it a while (10 minutes should be plenty) and then try the upgrade command again, it might tell you there are no upgrade available in which case UA will have done that for you, but if not let the upgrade process finish and then try the last two commands from #39

Jean 1 · 2019-12-13 00:30

Ok, I have waited for 10 minutes and I have done what you say. Here is exactly what's happened:

adminq@q4os-desktop:~/Bureau/pppoe$ LC_ALL=C sudo apt update
Hit:1 http://security.debian.org/debian-security buster/updates InRelease
Hit:2 http://ftp.debian.org/debian buster InRelease
Hit:3 http://ftp.debian.org/debian buster-updates InRelease
Hit:4 http://q4os.org/q4repo q4os-3-0-cn InRelease
Hit:5 http://q4os.org/qtderepo buster InRelease
Hit:6 http://q4os.org/qextrepo buster-firefox-cn InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
All packages are up to date.
adminq@q4os-desktop:~/Bureau/pppoe$ LC_ALL=C sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
adminq@q4os-desktop:~/Bureau/pppoe$ LC_ALL=C sudo apt install console-setup
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
console-setup-linux kbd
The following NEW packages will be installed:
console-setup console-setup-linux kbd
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 1925 kB of archives.
After this operation, 3843 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://ftp.debian.org/debian buster/main i386 kbd i386 2.0.4-4 [333 kB]
Get:2 http://ftp.debian.org/debian buster/main i386 console-setup-linux all 1.193~deb10u1 [1494 kB]
Get:3 http://ftp.debian.org/debian buster/main i386 console-setup all 1.193~deb10u1 [98.5 kB]
Fetched 1925 kB in 15s (125 kB/s)
Preconfiguring packages ...
Selecting previously unselected package kbd.
(Reading database ... 69433 files and directories currently installed.)
Preparing to unpack .../archives/kbd_2.0.4-4_i386.deb ...
Unpacking kbd (2.0.4-4) ...
Selecting previously unselected package console-setup-linux.
Preparing to unpack .../console-setup-linux_1.193~deb10u1_all.deb ...
Unpacking console-setup-linux (1.193~deb10u1) ...
Selecting previously unselected package console-setup.
Preparing to unpack .../console-setup_1.193~deb10u1_all.deb ...
Unpacking console-setup (1.193~deb10u1) ...
Setting up kbd (2.0.4-4) ...
Setting up console-setup-linux (1.193~deb10u1) ...
Created symlink /etc/systemd/system/sysinit.target.wants/keyboard-setup.service -> /lib/systemd/system/keyboard-setup.service.
Created symlink /etc/systemd/system/multi-user.target.wants/console-setup.service -> /lib/systemd/system/console-setup.service.
Setting up console-setup (1.193~deb10u1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for systemd (241-7~deb10u2) ...
adminq@q4os-desktop:~/Bureau/pppoe$ LC_ALL=C sudo apt -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
adminq@q4os-desktop:~/Bureau/pppoe$

Dai_trying · 2019-12-13 00:45

Ok that looks great! hopefully now you should be able to download the installer for palemoon browser from the Q4OS repository https://sourceforge.net/projects/q4os/f … erimental/ or you could simply type in a terminal

wget https://sourceforge.net/projects/q4os/files/apps_experimental/setup_q4os-palemoon_3.1-a1_all.esh

which might be easier as you are having browser problems. After that use your file manager and navigate to the installer file, double click it to start the installer. When it has finished you should have an icon either on the desktop or in your menu for the palemoon browser, fire it up and hopefully it should work ok.

If you have problems with palemoon you could start it in a terminal (just type palemoon and enter) then report any errors here.

Jean 1 · 2019-12-13 15:23

Thank you very much for your help.

I have installed palemoon by using the command:

wget https://sourceforge.net/projects/q4os/f … a1_all.esh

When I launch the browser, it's OK but after 3 or 4 pages, the PC froze. I'm obliged to switch off the power and to reboot (the mouse cursor works but I can't do anything with it, nor turn off the computer ). I did that 3 times...So it doesn't work.
Can it be a problem of about 32 or 64 bits browsers or a bad version of palemoon?...

Dai_trying · 2019-12-13 19:30

I haven't heard any other users having problems with it but of course it is possible, could you open palemoon from the command line and monitor any errors while you are browsing as it might contain some useful information.

Jean 1 · 2019-12-13 23:59

I have launched palemoon from the command line and I have reduced the window to see what was happening in the terminal if the PC frozes: nothing at all.

The¨PC has frozen, the mouse cursor was working but I couldn't do anything with it. After 5 minutes, I was obliged to turn off the power again.

But I have could surf any longer as I stayed on google. I think it depends on which site I go: here for exemple, https://www.leboncoin.fr/ventes_immobilieres/offres/ the PC frozes.

May it be a problem caused by javascript? (that's the case with windows XP for that page; but with windows 7 and Firefox on an other PC all is OK...)

In fact, my unique purpose is to try to use Q4OS to avoid to have to buy windows OS. I just want to solve the javascript problem I have in the browser with windows XP to display the pages on the web...

Dai_trying · 2019-12-14 00:16

That page gives 3 main errors.

1. downloadable font: kern: Too large subtable, table discarded (font-family: "OpenSans" style:normal weight:normal stretch:normal src index:0) source: https://static-rav.leboncoin.fr/e78dce5 … 248d.woff2

2. unreachable code after return statement in tags.js (2 times)

3. This site appears to use a scroll-linked positioning effect. This may not work well with asynchronous panning; see https://developer.mozilla.org/docs/Mozi … kedEffects for further details and to join the discussion on related tools and features!

I would guess this is the cause of your crashes, actually that and the fact you are using what is now considered a low spec machine.

Are there any other pages that cause this to happen?

JimW · 2019-12-14 04:58

Ok, I'll jump back in here. I've been following, hoping you would find a solution.
I have one webpage that does that same thing. A few times (very few) I had a terminal open in another virtual desktop with the command "killall firefox" typed and ready for enter. When the webpage started locking up the computer I could change to the other desktop and press enter. Takes a few clicks and a wait till it would switch to the other desktop. A few times that would kill firefox and unlock the computer, other times I had to do like Jean 1 and power down the computer. Now I tend to avoid that website.
Just the one webpage. Haven't encountered any others that do that. I first thought it was my ad blocker, but disabling that did not help.
Webpage https://bongino.com/
it usually takes a few minutes till the lockup happens.

Dai_trying · 2019-12-14 09:07

The first error I saw on that page is [Facebook Pixel] - Duplicate Pixel ID: 2064627950451022. but I don't imagine that would cause an issue, but after about a minute it popped another error to the console

This site appears to use a scroll-linked positioning effect. This may not work well with asynchronous panning; see https://developer.mozilla.org/docs/Mozi … kedEffects for further details and to join the discussion on related tools and features!

And as this is the same as one from the previous page checked I would imagine this would be the problem. It might be worth reporting it to the site owners to see if they want to fix it (Or maybe report error to the browser devs).

Q4OS Forum

#26 2019-12-08 21:23

Re: No internet connection!

#27 2019-12-08 22:20

Re: No internet connection!

#28 2019-12-09 22:13

Re: No internet connection!

#29 2019-12-09 22:33

Re: No internet connection!

#30 2019-12-09 23:04

Re: No internet connection!

#31 2019-12-09 23:40

Re: No internet connection!

#32 2019-12-10 08:40

Re: No internet connection!

#33 2019-12-10 19:24

Re: No internet connection!

#34 2019-12-10 19:28

Re: No internet connection!

#35 2019-12-10 20:23

Re: No internet connection!

#36 2019-12-10 21:56

Re: No internet connection!

#37 2019-12-11 00:21

Re: No internet connection!

#38 2019-12-11 00:48

Re: No internet connection!

#39 2019-12-11 07:42

Re: No internet connection!

#40 2019-12-11 12:27

Re: No internet connection!

#41 2019-12-11 19:59

Re: No internet connection!

#42 2019-12-11 20:17

Re: No internet connection!

#43 2019-12-13 00:30

Re: No internet connection!

#44 2019-12-13 00:45

Re: No internet connection!

#45 2019-12-13 15:23

Re: No internet connection!

#46 2019-12-13 19:30

Re: No internet connection!

#47 2019-12-13 23:59

Re: No internet connection!

#48 2019-12-14 00:16

Re: No internet connection!

#49 2019-12-14 04:58

Re: No internet connection!

#50 2019-12-14 09:07

Re: No internet connection!

Board footer