You are not logged in.
I have been using Q4OS Centaurus untill now with no network problems. I just installed GEMINI and I have a curious problem with the network connection.
I live in a house with 2 floors. I have a Synology router, a repeater also Synology and another one a TP-LINK RE650 which is the one to which I connect the PC.
With CENTAURUS everything is ok, but with GEMINI I can't get it to connect to the TP-LINK, the networks appear, but it is not possible to connect to them, althrough it is possible to connect to the weak signal of a Synology repeater, on the floor below. Or a mobile access point with no issues
I have tried with a laptop and the same thing happens.
I have also tried with other distributions and it seems to be the same. If it is with Kernel 4.19 everything is ok, but, with 5.10 or 5.15 it is not possible. Other devices, like mobiles,laptop with W10, connect without any problem.
Can you help me?
Thanks.
System: Host: altereq Kernel: 5.15.0-0.bpo.2-amd64 x86_64 bits: 64 Desktop: KDE Plasma 5.20.5 Distro: Q4OS 4.7.1-n1
Machine: Type: Desktop System: Micro-Star product: MS-7A40 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B450I GAMING PLUS AC (MS-7A40) v: 2.0 serial: <superuser required>
UEFI [Legacy]: American Megatrends v: A.B0 date: 11/12/2019
CPU: Info: Quad Core model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64 type: MCP L2 cache: 2 MiB
Speed: 1423 MHz min/max: 1600/3500 MHz Core speeds (MHz): 1: 1423 2: 1422 3: 1423 4: 1424
Graphics: Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] driver: amdgpu v: kernel
Display: x11 server: X.Org 1.20.11 driver: loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: AMD Radeon Vega 8 Graphics (RAVEN DRM 3.42.0 5.15.0-0.bpo.2-amd64 LLVM 11.0.1) v: 4.6 Mesa 20.3.5
Audio: Device-1: Advanced Micro Devices [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
Device-2: Advanced Micro Devices [AMD] Family 17h HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.15.0-0.bpo.2-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: N/A
Device-2: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi
IF: wlp38s0 state: up mac: d4:3b:04:a2:2f:f1
Bluetooth: Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb
Report: ID: hci0 state: down address: 00:00:00:00:00:00
Drives: Local Storage: total: 6.16 TiB used: 1.18 TiB (19.1%)
ID-1: /dev/sda vendor: Crucial model: CT275MX300SSD1 size: 256.17 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD20EARX-00PASB0 size: 1.82 TiB
ID-3: /dev/sdc vendor: Western Digital model: WD5000LPVX-08V0TT5 size: 465.76 GiB
ID-4: /dev/sdd vendor: Western Digital model: WD40EFRX-68WT0N0 size: 3.64 TiB
Partition: ID-1: / size: 29.02 GiB used: 12.22 GiB (42.1%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 511 MiB used: 11.8 MiB (2.3%) fs: vfat dev: /dev/sda1
Swap: Alert: No Swap data was found.
Sensors: Message: No sensors data was found. Is sensors configured?
Info: Processes: 211 Uptime: 8m Memory: 13.67 GiB used: 1.48 GiB (10.8%) Shell: Bash inxi: 3.3.01
altereq@altereq:~$ sudo rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
Offline
Well, I'm not a linux expert.
The only solutions I've found are to revert to a previous version (with hardware compatibility problems), or to move to a current one that doesn't have this issue.I have found a couple: Mageia and Opensuse.
Time to change,...
Offline