[ 226.410] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 226.410] X Protocol Version 11, Revision 0 [ 226.410] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian [ 226.410] Current Operating System: Linux debian 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) i686 [ 226.410] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live components quiet splash username=adminq initrd=/live/initrd.img [ 226.410] Build Date: 11 February 2015 01:14:26AM [ 226.410] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 226.410] Current version of pixman: 0.32.6 [ 226.410] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 226.410] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 226.410] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 18 15:13:01 2016 [ 226.441] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 226.441] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 227.357] (==) No Layout section. Using the first Screen section. [ 227.357] (==) No screen section available. Using defaults. [ 227.357] (**) |-->Screen "Default Screen Section" (0) [ 227.357] (**) | |-->Monitor "" [ 227.358] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 227.358] (==) Automatically adding devices [ 227.358] (==) Automatically enabling devices [ 227.358] (==) Automatically adding GPU devices [ 227.658] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 227.658] Entry deleted from font path. [ 227.658] (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins [ 227.658] (==) ModulePath set to "/usr/lib/xorg/modules" [ 227.658] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 227.658] (II) Loader magic: 0xb7782700 [ 227.658] (II) Module ABI versions: [ 227.658] X.Org ANSI C Emulation: 0.4 [ 227.658] X.Org Video Driver: 18.0 [ 227.658] X.Org XInput driver : 21.0 [ 227.658] X.Org Server Extension : 8.0 [ 227.659] (II) xfree86: Adding drm device (/dev/dri/card0) [ 227.661] (--) PCI:*(0:1:0:0) 10de:0221:1682:2152 rev 161, Mem @ 0xe8000000/16777216, 0xd0000000/268435456, 0xe9000000/16777216, BIOS @ 0x????????/131072 [ 227.661] (II) LoadModule: "glx" [ 227.667] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 232.936] (II) Module glx: vendor="X.Org Foundation" [ 232.936] compiled for 1.16.4, module version = 1.0.0 [ 232.936] ABI class: X.Org Server Extension, version 8.0 [ 232.936] (==) AIGLX enabled [ 232.936] (==) Matched nouveau as autoconfigured driver 0 [ 232.936] (==) Matched nv as autoconfigured driver 1 [ 232.936] (==) Matched nouveau as autoconfigured driver 2 [ 232.936] (==) Matched nv as autoconfigured driver 3 [ 232.936] (==) Matched modesetting as autoconfigured driver 4 [ 232.936] (==) Matched fbdev as autoconfigured driver 5 [ 232.936] (==) Matched vesa as autoconfigured driver 6 [ 232.936] (==) Assigned the driver to the xf86ConfigLayout [ 232.936] (II) LoadModule: "nouveau" [ 232.937] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 233.934] (II) Module nouveau: vendor="X.Org Foundation" [ 233.934] compiled for 1.16.0, module version = 1.0.11 [ 233.934] Module class: X.Org Video Driver [ 233.934] ABI class: X.Org Video Driver, version 18.0 [ 233.934] (II) LoadModule: "nv" [ 233.939] (WW) Warning, couldn't open module nv [ 233.939] (II) UnloadModule: "nv" [ 233.939] (II) Unloading nv [ 233.939] (EE) Failed to load module "nv" (module does not exist, 0) [ 233.939] (II) LoadModule: "modesetting" [ 233.940] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 234.512] (II) Module modesetting: vendor="X.Org Foundation" [ 234.512] compiled for 1.16.4, module version = 0.9.0 [ 234.512] Module class: X.Org Video Driver [ 234.512] ABI class: X.Org Video Driver, version 18.0 [ 234.512] (II) LoadModule: "fbdev" [ 234.512] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 234.520] (II) Module fbdev: vendor="X.Org Foundation" [ 234.520] compiled for 1.15.99.904, module version = 0.4.4 [ 234.520] Module class: X.Org Video Driver [ 234.520] ABI class: X.Org Video Driver, version 18.0 [ 234.520] (II) LoadModule: "vesa" [ 234.521] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 235.086] (II) Module vesa: vendor="X.Org Foundation" [ 235.086] compiled for 1.15.99.904, module version = 2.3.3 [ 235.086] Module class: X.Org Video Driver [ 235.086] ABI class: X.Org Video Driver, version 18.0 [ 235.086] (II) NOUVEAU driver Date: Thu Aug 28 03:57:48 2014 +0200 [ 235.086] (II) NOUVEAU driver for NVIDIA chipset families : [ 235.086] RIVA TNT (NV04) [ 235.086] RIVA TNT2 (NV05) [ 235.086] GeForce 256 (NV10) [ 235.086] GeForce 2 (NV11, NV15) [ 235.086] GeForce 4MX (NV17, NV18) [ 235.086] GeForce 3 (NV20) [ 235.086] GeForce 4Ti (NV25, NV28) [ 235.086] GeForce FX (NV3x) [ 235.086] GeForce 6 (NV4x) [ 235.086] GeForce 7 (G7x) [ 235.086] GeForce 8 (G8x) [ 235.086] GeForce GTX 200 (NVA0) [ 235.086] GeForce GTX 400 (NVC0) [ 235.086] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 235.086] (II) FBDEV: driver for framebuffer: fbdev [ 235.086] (II) VESA: driver for VESA chipsets: vesa [ 235.086] (++) using VT number 8 [ 235.099] (II) [drm] nouveau interface version: 1.1.2 [ 235.099] (WW) Falling back to old probe method for modesetting [ 235.099] (WW) Falling back to old probe method for fbdev [ 235.099] (II) Loading sub module "fbdevhw" [ 235.104] (II) LoadModule: "fbdevhw" [ 235.104] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 235.666] (II) Module fbdevhw: vendor="X.Org Foundation" [ 235.666] compiled for 1.16.4, module version = 0.0.2 [ 235.666] ABI class: X.Org Video Driver, version 18.0 [ 235.667] (WW) Falling back to old probe method for vesa [ 235.667] (II) Loading sub module "dri2" [ 235.667] (II) LoadModule: "dri2" [ 235.667] (II) Module "dri2" already built-in [ 235.667] (--) NOUVEAU(0): Chipset: "NVIDIA NV4A" [ 235.667] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 235.667] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 235.667] (==) NOUVEAU(0): RGB weight 888 [ 235.667] (==) NOUVEAU(0): Default visual is TrueColor [ 235.667] (==) NOUVEAU(0): Using HW cursor [ 235.667] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 235.667] (==) NOUVEAU(0): Page flipping enabled [ 235.667] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 235.667] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 235.667] (II) NOUVEAU(0): Initializing outputs ... [ 235.699] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 235.756] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section [ 235.812] (II) NOUVEAU(0): Output TV-1 has no monitor section [ 235.812] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 235.812] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 235.812] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 236.004] (II) NOUVEAU(0): EDID for output VGA-1 [ 236.004] (II) NOUVEAU(0): Manufacturer: DEL Model: 3010 Serial#: 1095381066 [ 236.004] (II) NOUVEAU(0): Year: 2004 Week: 9 [ 236.004] (II) NOUVEAU(0): EDID Version: 1.3 [ 236.004] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 236.004] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen [ 236.005] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 236.005] (II) NOUVEAU(0): Gamma: 2.20 [ 236.005] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 236.005] (II) NOUVEAU(0): Default color space is primary color space [ 236.005] (II) NOUVEAU(0): First detailed timing is preferred mode [ 236.005] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581 [ 236.005] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.310 whiteY: 0.330 [ 236.005] (II) NOUVEAU(0): Supported established timings: [ 236.005] (II) NOUVEAU(0): 720x400@70Hz [ 236.005] (II) NOUVEAU(0): 640x480@60Hz [ 236.005] (II) NOUVEAU(0): 640x480@75Hz [ 236.005] (II) NOUVEAU(0): 800x600@60Hz [ 236.005] (II) NOUVEAU(0): 800x600@75Hz [ 236.005] (II) NOUVEAU(0): 1024x768@60Hz [ 236.005] (II) NOUVEAU(0): 1024x768@75Hz [ 236.005] (II) NOUVEAU(0): 1280x1024@75Hz [ 236.005] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 236.005] (II) NOUVEAU(0): Supported standard timings: [ 236.005] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 236.005] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 236.005] (II) NOUVEAU(0): Supported detailed timing: [ 236.005] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 236.005] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 236.005] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 236.005] (II) NOUVEAU(0): Serial No: 2Y31542RAJ0J [ 236.005] (II) NOUVEAU(0): Monitor name: DELL 1703FP [ 236.005] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz [ 236.005] (II) NOUVEAU(0): EDID (in hex): [ 236.005] (II) NOUVEAU(0): 00ffffffffffff0010ac10304a304a41 [ 236.005] (II) NOUVEAU(0): 090e01030e221b78ee6f86a25a4d9424 [ 236.005] (II) NOUVEAU(0): 1a4f54a54b00714f8180010101010101 [ 236.005] (II) NOUVEAU(0): 010101010101302a009851002a403070 [ 236.005] (II) NOUVEAU(0): 1300520e1100001e000000ff00325933 [ 236.005] (II) NOUVEAU(0): 3135343252414a304a0a000000fc0044 [ 236.005] (II) NOUVEAU(0): 454c4c203137303346500a20000000fd [ 236.005] (II) NOUVEAU(0): 00384c1e500e000a2020202020200061 [ 236.005] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 236.005] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 236.005] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 236.005] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 236.088] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 236.148] (II) NOUVEAU(0): EDID for output TV-1 [ 236.148] (II) NOUVEAU(0): Output VGA-1 connected [ 236.148] (II) NOUVEAU(0): Output DVI-I-1 disconnected [ 236.148] (II) NOUVEAU(0): Output TV-1 disconnected [ 236.148] (II) NOUVEAU(0): Using exact sizes for initial modes [ 236.148] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024 [ 236.148] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 236.148] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0) [ 236.148] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 236.148] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz [ 236.148] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 236.148] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 236.148] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 236.148] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 236.148] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 236.148] (++) NOUVEAU(0): DPI set to (96, 96) [ 236.148] (II) Loading sub module "fb" [ 236.148] (II) LoadModule: "fb" [ 236.149] (II) Loading /usr/lib/xorg/modules/libfb.so [ 238.500] (II) Module fb: vendor="X.Org Foundation" [ 238.500] compiled for 1.16.4, module version = 1.0.0 [ 238.500] ABI class: X.Org ANSI C Emulation, version 0.4 [ 238.500] (II) Loading sub module "shadowfb" [ 238.500] (II) LoadModule: "shadowfb" [ 238.503] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 238.547] (II) Module shadowfb: vendor="X.Org Foundation" [ 238.547] compiled for 1.16.4, module version = 1.0.0 [ 238.547] ABI class: X.Org ANSI C Emulation, version 0.4 [ 238.547] (II) UnloadModule: "modesetting" [ 238.547] (II) Unloading modesetting [ 238.547] (II) UnloadModule: "fbdev" [ 238.547] (II) Unloading fbdev [ 238.547] (II) UnloadSubModule: "fbdevhw" [ 238.547] (II) Unloading fbdevhw [ 238.547] (II) UnloadModule: "vesa" [ 238.547] (II) Unloading vesa [ 238.547] (--) Depth 24 pixmap format is 32 bpp [ 238.551] (II) NOUVEAU(0): Channel setup complete. [ 238.551] (II) NOUVEAU(0): [DRI2] Setup complete [ 238.551] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 238.551] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 239.978] (II) Loading sub module "exa" [ 239.979] (II) LoadModule: "exa" [ 239.979] (II) Loading /usr/lib/xorg/modules/libexa.so [ 240.003] (II) Module exa: vendor="X.Org Foundation" [ 240.003] compiled for 1.16.4, module version = 2.6.0 [ 240.003] ABI class: X.Org Video Driver, version 18.0 [ 240.003] (II) EXA(0): Driver allocated offscreen pixmaps [ 240.003] (II) EXA(0): Driver registered support for the following operations: [ 240.003] (II) Solid [ 240.003] (II) Copy [ 240.003] (II) Composite (RENDER acceleration) [ 240.003] (II) UploadToScreen [ 240.003] (II) DownloadFromScreen [ 240.003] (==) NOUVEAU(0): Backing store enabled [ 240.003] (==) NOUVEAU(0): Silken mouse enabled [ 240.003] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter. [ 240.003] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 240.003] (==) NOUVEAU(0): DPMS enabled [ 240.003] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 240.008] (--) RandR disabled [ 240.049] (II) SELinux: Disabled on system [ 277.877] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 277.877] (II) AIGLX: enabled GLX_ARB_create_context [ 277.877] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 277.877] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 277.877] (II) AIGLX: enabled GLX_INTEL_swap_event [ 277.877] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 277.877] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 277.877] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 277.877] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 277.879] (II) AIGLX: Loaded and initialized nouveau [ 277.879] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 277.889] (II) NOUVEAU(0): NVEnterVT is called. [ 277.889] (II) NOUVEAU(0): Setting screen physical size to 338 x 270 [ 277.889] resize called 1280 1024 [ 279.419] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 279.419] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 279.419] (II) LoadModule: "evdev" [ 279.422] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 279.658] (II) Module evdev: vendor="X.Org Foundation" [ 279.658] compiled for 1.16.0, module version = 2.9.0 [ 279.658] Module class: X.Org XInput Driver [ 279.658] ABI class: X.Org XInput driver, version 21.0 [ 279.658] (II) Using input driver 'evdev' for 'Power Button' [ 279.658] (**) Power Button: always reports core events [ 279.658] (**) evdev: Power Button: Device: "/dev/input/event4" [ 279.658] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 279.658] (--) evdev: Power Button: Found keys [ 279.658] (II) evdev: Power Button: Configuring as keyboard [ 279.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 279.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 279.658] (**) Option "xkb_rules" "evdev" [ 279.658] (**) Option "xkb_model" "pc105" [ 279.658] (**) Option "xkb_layout" "us" [ 279.660] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 279.660] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 279.660] (II) Using input driver 'evdev' for 'Power Button' [ 279.660] (**) Power Button: always reports core events [ 279.660] (**) evdev: Power Button: Device: "/dev/input/event3" [ 279.661] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 279.661] (--) evdev: Power Button: Found keys [ 279.661] (II) evdev: Power Button: Configuring as keyboard [ 279.661] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3" [ 279.661] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 279.661] (**) Option "xkb_rules" "evdev" [ 279.661] (**) Option "xkb_model" "pc105" [ 279.661] (**) Option "xkb_layout" "us" [ 279.663] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1) [ 279.663] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 279.663] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 279.663] (**) Logitech USB Receiver: always reports core events [ 279.663] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1" [ 279.663] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 279.663] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons [ 279.663] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 279.663] (--) evdev: Logitech USB Receiver: Found relative axes [ 279.663] (--) evdev: Logitech USB Receiver: Found x and y relative axes [ 279.663] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 279.663] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 279.663] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 279.663] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 279.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C52F.0001/input/input1/event1" [ 279.663] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8) [ 279.664] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 279.664] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 279.664] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 279.664] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 279.664] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 279.665] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) [ 279.665] (II) No input driver specified, ignoring this device. [ 279.665] (II) This device may have been added with another device file. [ 279.666] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2) [ 279.666] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 279.666] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 279.666] (**) Logitech USB Receiver: always reports core events [ 279.666] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2" [ 279.666] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 279.666] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons [ 279.667] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 279.667] (--) evdev: Logitech USB Receiver: Found relative axes [ 279.667] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist. [ 279.667] (--) evdev: Logitech USB Receiver: Found absolute axes [ 279.667] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist. [ 279.667] (--) evdev: Logitech USB Receiver: Found keys [ 279.667] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 279.667] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 279.667] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 279.667] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 279.667] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 279.667] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C52F.0002/input/input2/event2" [ 279.667] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9) [ 279.667] (**) Option "xkb_rules" "evdev" [ 279.667] (**) Option "xkb_model" "pc105" [ 279.667] (**) Option "xkb_layout" "us" [ 279.667] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 279.667] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. [ 279.668] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 279.668] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 279.668] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 279.668] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 279.669] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 279.670] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 279.670] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 279.670] (**) AT Translated Set 2 keyboard: always reports core events [ 279.670] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 279.670] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 279.670] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 279.670] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 279.670] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 279.670] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 279.670] (**) Option "xkb_rules" "evdev" [ 279.670] (**) Option "xkb_model" "pc105" [ 279.670] (**) Option "xkb_layout" "us" [ 279.672] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 279.672] (II) No input driver specified, ignoring this device. [ 279.672] (II) This device may have been added with another device file. [ 279.691] (II) evdev: AT Translated Set 2 keyboard: Close [ 279.691] (II) UnloadModule: "evdev" [ 279.691] (II) evdev: Logitech USB Receiver: Close [ 279.691] (II) UnloadModule: "evdev" [ 279.691] (II) evdev: Logitech USB Receiver: Close [ 279.691] (II) UnloadModule: "evdev" [ 279.691] (II) evdev: Power Button: Close [ 279.691] (II) UnloadModule: "evdev" [ 279.691] (II) evdev: Power Button: Close [ 279.691] (II) UnloadModule: "evdev" [ 279.717] (II) NOUVEAU(0): NVLeaveVT is called. [ 279.752] (EE) Server terminated successfully (0). Closing log file.